Tension Gauges

Loos Cableware® Division offers a series of gauges to measure the tension in cables and rods from 3/32 to 3/8 inch in diameter (2.5 mm to 10 mm). These gauges are designed for setting the proper tension in the standing rigging of sailboats and also for other applications such as supporting cables for radio towers, large tents and other structures. The gauges are relatively inexpensive and are designed to be suitable for rugged marine service. The gauges measure tension over a range of approximately 5 to 25 % of the breaking strength of the cable or rod and provide an accuracy of + or - 5%. The "Professional Models", PT , RT and 90 & 91 series provide an increasing durability, accuracy and convenience of use when compared to our popular standard models. The gauge may be hooked on the wire and will remain in position while the tension is adjusted.

Benefits of correct rigging tension:

The rigging tension has an important influence on both the durability and performance of the system. Contrary to popular thought a slack rig is more punishing to the cables, fittings, and hull than a properly adjusted tight rig, since it can subject the entire system to excessive movement and can cause misalignment, wear, shock loading, and fatigue. Similarly, the sailing performance is affected since the rigging tension determines the shape and deflection of the mast and the sag of the forestay. The expert skipper will benefit by maintaining consistent rigging tension while developing the optimum sail shape and sailing tactics.

Please refer to our "How To" section for instructions on how to use our gauges.

	90 Series
	91 Series
	PT Series
	Rod Tension Gauge

Demos and How To's

What's New

New Products