901 Industrial Blvd. Naples, FL 34104-3715  

Products

Customer Service

Site Map

Products

 
No. 0-7/32
Locoloc® Hand Swager No. 0-7/32 Locoloc® No. 0-7/32 Hand Swager - Swages 7/32"oval sleeves. 28" long and weighs 5 pounds.

No. 2
Locoloc® Hand Swager No. 2-H Locoloc® No. 2-H Hand Swager - Powerfully rugged with jaws of forged steel, heat treated for high strength, plus specially heat treated hardened bolts enc...

#4-H
Locoloc® Hydraulic Swager #4-H The #4-H Locoloc® Hydraulic Swager - Combines 30 tons of strength with an independent hydraulic power supply. It's lighter and more compact than normal,...

.020" (1/64)
Locking And Seizing Wire .020" (1/64) Loos Cableware® Division sells the Locking & Seizing Wire that is used by the aircraft industry to secure all bolts, nuts or hardware subject to vibratio...

.032" (1/32)
Locking And Seizing Wire .032" (1/32) Loos Cableware® Division sells the Locking & Seizing Wire that is used by the aircraft industry to secure all bolts, nuts or hardware subject to vibratio...

.041" (3/64)
Locking & Seizing Wire .041" (3/64) Loos Cableware® Division sells the Locking & Seizing Wire that is used by the aircraft industry to secure all bolts, nuts or hardware subject to vibrat...

1032 and 1132
1000 MCM Cable Cutters 1032 and 1132 Available with steel or fiberglass handles with 100KV/ft. dielectric. Rugged chrome/molly steel blades offer the excellent cutting edge performance with t...

2/0 AWG
Hand Held Cable Cutters 2/0 AWG Hand Held Cutter - The 2/0 Cutter (Cat. No. 910) will cut power cable, control cable, battery cable, welding cable, and up to 2/0 AWG copper. Features ...

3015
350 MCM Cable Cutter 3015 Cutter 3015 Cutter - Innovation makes this the best value in the industry. Cuts 350 MCM cable in seconds and features rugged compact construction at a low cost ...

90 Series
Tension Gauges 90 Series The Loos economy tension gauge takes the guesswork out of cable tension adjustment. It's especially designed for accurate, repeatable tuning of a sailboat's standing rigg...

91 Series
Tension Gauges 91 Series The Loos economy tension gauge takes the guesswork out of cable tension adjustment. It's especially designed for accurate, repeatable tuning of a sailboat's standing rigg...

AN100
AN Series Thimbles AN100 Thimbles AN thimbles come in either cold-rolled steel (zinc plated) or stainless steel (natural finish). Fit cable diameters from 1/16" to 3/8" to meet the most deman...

AN111 Series
Cable Bushings AN111 Series Cable Bushings AN111 Series lets cable end rotate over a bolt or pin.  

AZP
Swaging Tool Kits Aluminum AZP (Aluminum Kit) All you need to swage popular sizes... comtains #1-SC Hand Tool, a C7 Cable Cutter, assortment of stopo and oval sleeves, assortment of thimbles... ...

BA3 Series
Plain Ball End Fittings BA3 Series Plain Ball End Fittings The BA3 Series of plain ball end fittings meet all requirements for Boeing’s BACT14B Plain Ball End Fittings and NAS494 series Plain Bal...

C-108
Felco Cable Cutters C-108 Simple construction, all parts protected against rust and salt water. Designed as an indispensable part of boat equipment. Especially suited for quick easy c...

C-112
Felco Cable Cutters C-112 Like the C-108, this cutter also has maximum force transmission, which applies the maximum leverage just at the right moment. This coupled with Swiss pr...

C-12
Felco Cable Cutters C-12 Swiss made Felco cutters are recognized around the world for their precision manufacture and cutting capabilities. Plastic coated handles afford a firm, c...

C-16
Felco Cable Cutters C-16 Swiss made Felco cutters are recognized around the world for their precision manufacture and cutting capabilities. Plastic coated handles afford a firm, comfo...

C-16E
Felco Cable Cutters C-16E Swiss made Felco cutters are recognized around the world for their precision manufacture and cutting capabilities. Plastic coated handles afford a firm, comf...

C-20A Wire Cutter
Simplex Cable Strippers Cutter C-20A Wire Cutter SIMPLEX WIRE CUTTER - These fine tools have been produced since 1920 and have enjoyed a worldwide reputation for quality and service for over...

C12B Bench Mounting Wire Rope Cutter
Felco CuttersC12B Bench Mounting Wire Rope CutterSwiss made Felco wire rope cutters are recognized around the world for their precision manufacture and cutting capabilities.

C16B Bench Mounting Wire Rope Cutter
Felco Wire Rope CutterC16B Bench Mounting Wire Rope CutterSwiss made Felco wire rope cutters are recognized around the world for their precision manufacture and cutting capabilities.

C2
Felco Cable Cutters C2 Cutters Blade Hardness is 10% Greater than Model C7. C7 Cable Cutters have a remarkable blade hardness. These cutters are even harder. This will extend the life of the...

C3
Felco C3 Cable Cutters C3 Cutters Blade Hardness is 10% Greater than Model C7. C7 Cable Cutters have a remarkable blade hardness. These cutters are even harder. This will extend the life of ...

C7
Felco Cable Cutters C7 Cutters Swiss made Felco wire rope cutters are recognized around the world for their precision manufacture and cutting capabilities. A cable when crushed or deformed in c...

C9
Felco Cable Cutters C9 Cutters The C-9 cutter is lightweight enough for overhead cutting yet strong enough for underwater work. Cut 1/4-inch steel cable with ease. Ideal for the tool...

CDO
Barbed Wire Cable Cutters CDO Cutter The "Commando" Cutter is the most efficient barbed wire cutter. Thanks to a special process the blades last even when cutting the hardest barbed w...

Cotter Pins
Misc. Cable Fittings Cotter Pins Cotter Pins secures clevis pin's in the hole of the part.

CP Cutters
Felco CP Cutters Steel Strapping and Banding For Steel Strapping and Banding. CP cutters are indispensable for cutting steel strapping and banding. They are also especially good for ...

CP2 Series
Wire Rope Clips CP2 Series MALLABLE, GALVANIZED, WIRE ROPE CLIPS: Standard wire rope clips are designed for maximum holding strength. Heavy duty construction throughout. For in-between sizes such...

CP3-2
Net Clips CP3-2 Net Clips were designed specifically for use on steel cables. They are used by the U.S. Navy and Coast Guard to fabricate safety nets and have found wide acceptance whenever wire ...

CP7 Series
Wire Rope Clips CP7 Series STAINLESS STEEL WIRE ROPE CLIPS: Rugged Stainless Steel Saddles with grooved deep recess to hold cable securely. Stainless Steel U bolts and nuts.

CSS
Swaging Tool Kits Copper  CSS(Copper Kit) All you need to swage popular sizes......contains #1-SC Hand Tool, a C7 Cable Cutter, assortment of stop and oval sleeves, assortment of thimbles.....

Duplex Sleeves
Duplex Sleeves Copper and Aluminum Duplex Oval Sleeves All our Locoloc® copper duplex oval sleeves and aluminum duplex oval sleeves are used to eye-splice in a wide variety of sizes raging from 1...

EY1 Series
Single Marine Eyes EY1 Series The EY1 series eyes end fittings are designed and manufactured to meet the strict standards of the marine industry.

EY1 Series
Marine Eyes EY1 Series The EY1 series eye end fittings are designed and manufactured to meet the strict standards of the marine industry.

EY18 Series
Heavy Duty Stainless Steel Wire Rope Thimbles   EY18 Series Stainless Steel Galvanized Wire Rope Thimbles (Type 302/304) protects the cable eye from wear or abrasion over mating part. 

EY411
Standard Galvanized Thimbles EY411 Series Standard Galvanized Wire Rope Thimbles protects the cable eye from wear or abrasion over mating part. 

EY414
Heavy Duty Galvanized Thimbles EY414 Series Heavy Duty Galvanized Wire Rope Thimbles

Felco C9B Bench Mounting Wire Rope Cutter
Felco Cutters C9B Bench Mounting Wire Rope CutterSwiss made Felco wire rope cutters are recognized around the world for their precision manufacture and cutting capabilities.

HC-16/20
Hydraulic Cable Cutters HC-16 Cutters HC-20 Cutters NEW!! HYDRAULIC CABLE CUTTERS - Cutter head swivels for difficult cutting positions. The HC-16, and the HC-20 has a capacity of 3/4" and small...

IW393
Safetytwist Pliers IW393 Three tools in one - cutter, wire twister and a pair of pliers. You can grip, twist and snip safety wire faster and better than ever before. Designed for aircraft, indust...

Large Aluminum
Aluminum Oval Sleeves SL1-V Large Aluminum Proudly made in our factory from the finest grade domestic aluminum alloy. Certification available upon request. Heat treated for outstanding swaging qu...

M1
Locoloc® Hand Swager M1 Locoloc® M1 Hand Swager - This portable, hand operated roll type swaging machine, will swage MS type terminals onto galvanized and stainless steel cables from ...

M1 Hand Swager
Swaging Machines M1 Hand Swager Locoloc® M1 Hand Swager - This portable, hand operated roll type swaging machine, will swage MS type terminals onto galvanized and stainless steel cabl...

M2
Bench Swager M2 Locoloc M2 Bench Swager - A sophisticated swaging machine which is bench mounted, hand powered with crank geared down for easy operation. This swaging machine will accomplished th...

M2
Swaging Machines M2 Bench Swager Locoloc M2 Bench Swager - A sophisticated swaging machine which is bench mounted, hand powered with crank geared down for easy operation. This swaging...

M2-PDK
Swaging Machines M2-PDK Drive Kit for type II Swaging Machines to CONVERT MANUAL MACHINES TO ELECTRIC POWER.

MS20663 Series
Double Shank Balls MS20663 Series The MS20663 Series double shank balls are manufactured from Military Specification Stainless Steel to the strict standards of the MS20663, and are certified...

MS20664
Single Shank Balls MS20664 Series The MS20664 Series single shank balls are manufactured from stainless steel in accordance with MIL-DTL-781to the strict standards of the MS20664, and are ce...

MS20667
Fork End Fittings MS20667 Series The MS20667 Fork End Fittings are manufactured from stainless steel in accordance with the requirements of MIL-DTL-781 and are certified to those standards. Loo...

MS20668
MS20668 Series Eyes MS20668 The MS20668 Eye End Fittings are manufactured from stainless steel in accordance with the requirements of MIL-DTL-781 and are certified to those standards. Loos Cablew...

MS21251
Turnbuckles MS21251 Turnbuckle Bodies (Brass, Steel, and Aluminum) Loos Cableware® Division provides the full line of MS21251 Turnbuckle Bodies (same as NAS649) in Brass, Steel, and Aluminum and ...

MS21252C
MS21252C 17-4PH Stainless Steel (Same as NAS 645) (Replaces AN 161) MS21252C Stainless Steel Also available in 4130 HT-CADMIUM PLATED adjustable fork end for clip locking turnbuckle barrel. 

MS21254C
MS21254 Series Eyes MS21254C 17-4PH Stainless Steel Eye End Fittings MS21254C Stainless Steel Also available in 4130 HT-CADIUM PLATED (Same as NAS 648) (Replaces AN 165)

MS21255C
MS21255 Series Eyes MS21255C 17-4PH Stainless Steel Eye End Fittings MS21255C Stainless Steel Also available in 4130 HT-CADMIUM PLATED (Same as NAS 647) (Replaces AN 170) adjustable cable ey...

MS21256
Clip Locking Turnbuckle MS21256 The MS21256 series clips are designed to fit the MS21251 Turnbuckle and lock into place the mating part. (Boeing Part No. B15AJ Series)

MS21256
Clip Locking Turnbuckle MS21256 The MS21256 series clips are designed to fit the MS21251 Turnbuckle and lock into place the mating part.Clip for locking component parts in turnbuckle barrel to st...

MS21259 Series
MS Series Studs MS21259 The MS21259 Series stud end fitting from Loos & Co are manufactured from stainless steel to the strict standards of MS21259, and are certified to that standard. Loos &...

MS21260 Series
MS Series Locking Studs MS21260 Series The MS21260 Locking Studs are manufactured from stainless steel in accordance with the requirements of MLI-DTL-781 and are certified to these standards. Lo...

NAS 1435-E
NAS Series Eye End Fittings NAS 1435-E The NAS1435-E series fork end fittings are manufactured from stainless steel in accordance to MIL-DTL-781 to the strict standards of Mil Spec NAS1435E....

NAS 1435-E
NAS Series Eye End Fittings NAS 1435-E Strap, Eye End Fittings its a movable cable end used with single Shank Ball MS20664 MIL SPEC. NAS 1435-E

NAS 1435-k
NAS Series Fork End Fittings NAS 1435-K Series The NAS1435-K series fork end fittings are manufactured from stainless steel in accordance to MIL-DTL-781 to the strict standards of  Mil Spec ...

NAS 1435-K Series
NAS Series Fork End Fittings NAS 1435-K Series Strap, Fork End Fittings MIL SPEC. NAS 1435-K

No. 0-1.5-3FS
Locoloc® Hand SwagerNo. 0-1.5-3FS Locoloc® 0-1.5-3FS hand cable swaging tool - Designed for swaging copper and aluminum 3/64", 1/16" and 3/32" oval and stop sleeve plus 1/8" stop sleeves. Full widt...

No. 0-1/16SC
Locoloc® Hand Swager No. 0-1/16SC Locoloc® No. 0-1/16SC Hand Swager - Swages 1/16"oval and stop sleeves, plus 3/32" stainless steel oval sleeves.20" long and weighs 4.2 pounds.

No. 0-1/4
Locoloc® Hand Swager No. 0-1/4 Locoloc® 0-1/4 single cavity hand cable swaging tool - Designed for swaging copper and aluminum Ľ oval sleeve and 1/4, 5/16 and 3/8 stop sleeve. Easy adjustment. Pa...

No. 0-1/8SC
Locoloc® Hand Swager No. 0-1/8SC Locoloc No. 0-1/8SC Hand Swager - Swages 1/8"oval and 5/32",3/16", 7/32 stop sleeves. 20" long and weighs 4.2 pounds.

No. 0-3/16SC
Locoloc® Hand Swager No. 0-3/16SC Locoloc® No. 0-3/16SC Hand Swager - Swages 3/16"oval sleeves. 20" long and weighs 4.2 pounds.

No. 0-3/32SC
Locoloc® Hand Swager No. 0-3/32SC Locoloc® No. 0-3/32SC Hand Swager - Swages 3/32"oval and 3/32",1/8" stop sleeves, plus 1/8" stainless steel oval sleeves. 20" long and weighs 4.2 po...

No. 0-3/64SC
Locoloc® Hand Swager No. 0-3/64SC Locoloc® No. 0-3/64SC Hand Swager - Swages 3/64"oval and stop sleeves, plus 3/16" and 1/16" stainless steel oval sleeves. 20" long and weighs 4.2 pounds.

No. 0-5/16
Locoloc® Hand Swager No. 0-5/16 Locoloc® No. 0-5/16 Hand Swager - Swages 5/16"oval sleeves. 28" long and weighs 5 pounds.

No. 0-5/32SC
Locoloc® Hand Swager No. 0-5/32SC Locoloc® No. 0-5/32SC Hand Swager - Swages 5/32"oval sleeves. 20" long and weighs 4.2 pounds.

No. 0-9/32
Locoloc® Hand Swager No. 0-9/32 Locoloc® No. 0-9/32 Hand Swager - Swages 9/32"oval sleeves. 28" long and weighs 5 pounds.

No. 000-WCI
Locoloc® Hand Swager No. 000-WCI Locoloc® No. 000-WCI Hand Swager - Small, compact, can be carried in your pocket. Swages 1/32", 3/64", and 1/16" oval and stop sleeves. Has built in cable cu...

No. 1-3-SBHS
Locoloc®Hand Swager No. 1-3-SBHS Locoloc® No. 1-3-SBHS Hand Swager - This tool is an outstanding small hand tool, and it does a great job of swaging small sleeves. This is a (4) cavity tool, swag...

No. 1-BSC
Locoloc Bench Swager No.1-BSC Swager Locoloc No. 1-BSC Bench Swager - Designed for in shop, one location jobs. Multi-compression jaws swage 1/16", 3/32", 1/8", 5/32", and 3/16" oval and stop ...

No. 1-P
Locoloc® Pneumatic Swager No. 1-P Locoloc® No. 1-P Pneumatic Swager - For the shop requiring a production tool the No. 1-P Pneumatic Swager eliminates hand labor and automates swaging...

No. 1-SC
Locoloc® Hand Swager No. 1-SC Locoloc® No. 1-SC multi cavity hand cable swaging tool – Designed for swaging copper and aluminum 1/16, 3/32, 1/8, 5/32 and 3/16 oval and stop sleeves, plus 7/32 sto...

No.3
Locoloc® Hand Swager No.3 Hand Swager Locoloc® No. 3 Hand Swager - Exerts 12 tons of pressure. A few strokes of the handle brings the dies from wide open to contact with the fitting to be swaged....

Oval Sleeves
Stainless SteelLocoloc Stainless Steel Oval SleevesLocoloc Stainless Steel Oval Sleeves make it simple and easy to lap and eye-splice cable and wire rope. Ideal for general outdoor, marine, corrosi...

PI1 Series
Clevis Pins PI1 Series Clevis Pins PI1 Series secures the mating part in the fork fitting.    

PT Series Tension Gauge
Tension Gauge PT Loos Professional Model Tension gauges perform cable tension readings accurately to within + or – 5% of the cable tension. They are the affordable answer to accurately measuring ...

PT-CR Series Tension Gauge
PROFESSIONAL MODEL #PT-CR PT-CR The Loos & Co Professional Model #PT-CR tension gauge is designed to provide an accurate measurement of the tension in architectural cable railing systems.

RT Rod Tension Gauge
Rod Tension Gauges RT Series Loos Cableware® Division  offers a series of gauges to measure the tension in rods from .172 to .375 inch in diameter over a range of approximately 5 to 25 %...

Simplex S-15 Wire Strippers
Simplex Cable Strippers S-15C SIMPLEX WIRE STRIPPERS - These fine tools have been produced since 1920 and have enjoyed a worldwide reputation for quality and service for over 60 years...

Simplex S-30 Wire Strippers
Simplex Cable Strippers S-30C These fine tools have been produced since 1920 and have enjoyed a worldwide reputation for quality and service for over 60 years. Loos Cableware® Division&nb...

SLF
Carbon Steel Sleeves - Flemish Eyes SLF Series Proudly made in the USA from the finest carbon steel. Certification available upon request. Annealed after manufacturing to assure uniform physical...

ST24 Series
Stainless Steel Cylindrical Terminal ST24 Series Stainless Steel Cylindrical Terminals are also known as "Stop Buttons","Sleeves", and "Boeing Buttons" (Boeing Part No. BACT 14A). These stainless...

Stop Sleeves
Stop Sleeves Copper and Aluminum All our copper stop sleeves and aluminum stop sleeves are capable of holding 1/3 to 1/2 of the rated breaking strength of the cable to which they are attached whe...

Information

 
What's New at Cableware
How to Use a Hand Swaging Tool
How to use a #1-SC
How to Use a #1-3-SBHS
How to use a Bench Swager
How to Use a #0-SC Hand Swager
How to Use a Hydraulic Swager
ISO Certificate
Customer Service Department
About Loos & Co. Cableware Division
How to use Tension Gauges
How to use PT Series Tension Gauges
How to use 90 & 91 Tension Gauges
How to use RT Series Tension Gauges
M2 Shipping Container / Bench unpacking instructions
How To Use And Setup The M1 For The Straight Shank Terminal
How to Use a 1P Swaging Machine
How to Use a Swaging Machine
How to use Felco Cable Cutters
How To Use And Setup The M2 For The Straight Shank Terminal
Power Drive Option
How To Use And Setup The M2 For The Single Or Double Shank Ball Terminal
MapHolder
How To Use And Setup The M1 For The Single Or Double Shank Ball Terminal
Cableware Divison How To Pages
Request for TECHNICAL ASSISTANCE
Request for Quote
LITERATURE REQUEST
Suggestions
Thank you
M1 Tool, Parts and Break Down List
M2 Replacement Parts
M2 Tool & Die Kits Reference Guide
1-SC Replacement Parts
M1 Parts list
1-SC Replacement Parts
#0-SC Replacement Parts
Upcoming Trade Show Events
New Products
Rigger's Guide to Proper Swaging
Concept of Swaging. What is swaging?
Use only copper sleeves for maximum safety in securing applications
Proof Testing of Copper Sleeves
Recommended Maximum Working Load
Wire Rope and Tool Selection
Field Cutting of Wire Ropes
How to Use LOCOLOC #1-SC Multi-Cavity Tool
How to use LOCOLOC #0-SC Series Single Cavity Tool
Proper Swaging Sequence of Copper Sleeves

Other Pages

 
Home
Contact Us
Terms & Conditions

© 2010 Loos & Co. Inc.